Loading ...
Loading ...
Loading ...
25
EN
• Handle them with care: the blades of the blender and on-the-go are
sharp.
• Rinse the blender jar or on-the-go bottle and its lid under running water.
• Clean the motor unit (B) with a damp cloth. Dry it carefully.
• To make cleaning easier, wash all removable parts with water and a little
washing-up liquid immediately after use.
• After cleaning, remember to correctly fit the seal (A4) back onto the
blade unit (A5, A6). Be careful to avoid any damage to the seal by the
blades cutting it.
Note: Incorrectly fitting the seal can result in ingredients leaking
from the blender jar.
CLEANING IN A DISHWASHER:
• The blender jar, measuring cup, on-the-go bottle and lid can be cleaned
in the upper basket of a dishwasher using the “ECO” program. The
blades and motor unit must not be cleaned in a dishwasher.
WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK?
Problems Causes Solutions
The appliance does not
work.
The appliance is not properly
plugged into the electrical
outlet.
Plug the appliance into an
electrical outlet and turn it on.
The blender jar or the on-the-
go bottle are not correctly
positioned or locked on the
motor unit.
Check that the blender jar
or the on-the-go bottle are
properly positioned and locked
on the motor unit as shown on
the images of the Instructions
for Use.
Motor overheated and
protected.
Unplug and let the
appliance cool down to room
temperature.
Excessive vibrations.
The appliance is not placed
on a flat, stable and heat-
resistant surface.
Place the appliance on a flat
surface.
The volume of ingredients is
too big.
Reduce the quantity of
ingredients in the appliance.
Loading ...
Loading ...
Loading ...