Loading ...
Loading ...
Loading ...
Before reinstalling the ball, check that the
pipe is not blocked by blowing into it, from
the opposite side to the picture above.
Press on the internal part of the safety valve
spring, from the opposite side to the picture
shown above, to check that it is not clogged.
Clean the metal plate using a damp sponge and check
that the manometric rod (shown in picture to the left) is
properly positioned to ensure that it is not blocked.
Rinse with water and check it moves freely.
Replace the watertight seal at least every
three years. This seal can only be replaced
by an Approved Service Centre.
Do not clean any part of the
Cook4me with abrasive sponges or
wire wool.
Do not store the appliance with the lid
closed. Leave open or half open or slightly
ajar. This will prevent unpleasant odours.
CLEANING
MAINTENANCE
Loading ...
Loading ...
Loading ...