Loading ...
Loading ...
Loading ...
8
© 2016 DJI. All Rights Reserved.
Using DJI Assistant 2
DJI Assistant 2 is used to upgrade and congure the ESC.
•
The DJI TAKYON Updater is required but is not included with
the ESC. To use DJI Assistant 2, connect the ESC to a computer
through the DJI TAKYON Updater as shown below.
•
To ensure your own safety, remove the propellers or disconnect
the ESC and motors before using DJI Assistant 2.
•
Unplug any other serial devices that are connected to your
computer before using the DJI TAKYON Updater.
ComputerESC TAKYON Updater
1. Download and install DJI Assistant 2 from the ofcial DJI website.
2. Connect the TAKYON Updater to the ESC with the signal cable and
to your computer with a Micro USB cable. The signal cable’s white
wire transmits the control signal ( ); the red wire transmits the data
signal (+); the black wire is for ground (-). DO NOT reverse the
signal cable.
3. Connect a battery (2S - 3S LiPo for Z318 or 2S - 4S LiPo for Z420)
to supply power to the ESC. Do not disconnect the ESC from your
computer or the power supply until conguration is complete.
4. Launch DJI Assistant 2. When a connection is established, the software
will display the connected devices.
Loading ...
Loading ...
Loading ...