Dji TAKYON Z318 AND Z420 User Manual

Loading ...

Using the Remote Controller for ESC Conguration

Be sure to remove the propellers before conguring the ESC.

If your ESC is in the regular input throttle signal mode, calibrate the

throttle range and switch the motor rotation direction using the remote

controller

1. Power on the remote controller and receiver. Ensure a good communication

between them.

2. Push the throttle stick all the way up, connect the ESC to the motor

and power on the ESC. The motor will start beeping, alternating

between a double beep and a triple beep with a two-second gap

between each beep. To configure the ESC, carry out each of the

following movements within the two-second gap.

a. Throttle Range Calibration

After the double beep, pull the throttle stick all the way down. A

1-second beep will sound if calibration is complete.

b. Motor Rotation Direction Switch

After the triple beep, pull the throttle stick all the way down. A

1-second beep will sound once motor rotation direction has been

switched.

Sound Description

You can instantly tell the system’s status by observing the emitted

sounds from the motor.

Loading ...

Dji TAKYON Z318 AND Z420