Loading ...
Loading ...
Loading ...
9
BELT ADJUSTMENTS
A B
E
D
68
70
S19
32
68
77
S13
66
66
C
64
58
F
34
S18
#80
#80
77
49
77
*NOTE: Tools S19, S18, & S13 (Socket Wrenches) are not included.
Remove the Plug (No. 70) from the Outer Belt Cover (No. 68) as indicated above in Figure A.
Unscrew and remove the Nut (No. 32) on the right side of the flywheel using Socket Wrench S19 as
indicated above in Figure B.
Unscrew and remove 4 Screws (No. 77) using Spanner (No. 80), then remove the Front Cover (No.
49) as indicated above in Figure C.
Unscrew and remove 2 Screws (No. 64) using Spanner (No. 80). Remove the Flywheel Axle Cover
(No. 58) as indicated above in Figure D.
Unscrew and remove Nut (No. 34) on the left side of the flywheel using Socket Wrench S18 as shown
in Figure E.
As shown in Figure F, secure 2 Nuts (No. 66) onto both sides of the Flywheel (No. 27) using Socket
Wrench S13 and tighten. While tightening, check the Belt (No. 38) to ensure that it is secured and
does not slip. Lastly, ensure that the Flywheel (No. 27) is properly centered.
Re-install and tighten Nuts (No. 32 & No. 34) to their respective sides of the Flywheel (No. 27) using
Socket Wrench S19 and Socket Wrench S18. Next, secure the Front Cover (No. 49) to the Outer
Belt Cover (No. 68) using 4 Screws (No. 77) and tighten with Spanner (No. 80). Secure the Flywheel
Axle Cover (No. 58) to the Main Frame (No. 1) using 2 Screws (No. 64). Attach Plug (No. 70) to the
Outer Belt Cover (No. 68).
Loading ...
Loading ...
Loading ...