Loading ...
Loading ...
Loading ...
JOBNAME: T12239NavigOG-US PAGE: 86 SESS: 8 OUTPUT: Mon Aug 25 08:48:29 2014
/restores/ford/ownguide/12239e-nav/og
Programming remote transmitters
It is necessary to have all (maximum of four — original and/or new) of
your remote transmitters available prior to beginning this procedure.
To program the transmitters yourself:
• Place the key in the ignition and turn
from 2 (LOCK) to 3 (OFF) and cycle
between 3 (OFF) and 4(ON) eight
times in rapid succession (within 10
seconds) with the eighth turn ending
in the 4 (ON) position. The doors will
lock/unlock to confirm that
programming mode has been entered.
• Within 20 seconds, program a remote
transmitter by pressing any button on
a transmitter. The doors will
lock/unlock to confirm that the remote transmitter has been
programmed. (If more than 20 seconds pass before pressing a remote
transmitter button, the programming mode will exit and the procedure
will have to be repeated.)
• Repeat the previous step to program additional remote transmitters.
The doors will lock/unlock to confirm that each remote transmitter has
been programmed.
• When you have completed programming the remote transmitters, turn
the ignition to 3 (OFF). Again the doors will lock/unlock to confirm
programming has been completed.
Illuminated entry
The illuminated entry system will turn on the interior lights when the
remote transmitter unlock control is pressed.
The illuminated entry system will turn off the interior lights if the
ignition switch is turned to the ON position, or if the remote transmitter
lock control is pressed, or after 25 seconds of illumination.
The inside lights will not turn off if:
• they have been turned on with the dimmer control or
• any door is open.
The battery save feature will turn off the interior lights 45 minutes after
the last door is closed, even if the dimmer control is on.
3
2
1
5
4
Controls and features
86
Loading ...
Loading ...
Loading ...