Loading ...
Loading ...
Loading ...
JOBNAME: T12239NavigOG-US PAGE: 101 SESS: 8 OUTPUT: Mon Aug 25 08:48:29 2014
/restores/ford/ownguide/12239e-nav/og
3. Use the black plastic clip (located
just above the detachable anchor) to
stow the loose seat belt.
• Pull the seat release lever located
on the lower right side of the
seatback while pushing the
seatback down into the seat
cushion.
• The seatback will latch into place.
4. Lift the seat release bar located
at the center of the seat near the
floor to release the floor latches.
5. While pulling up on the release
bar, lift the seat up and out of the floor tubs and roll seat rearward.
6. With assistance, lift the seat out of the vehicle.
Installing the third row seat
Always latch the vehicle seat to the floor, whether the seat is
occupied or empty. If not latched, the seat may cause injury
during a sudden stop.
When reinstalling a rear seat in your vehicle it must be placed in
its original position. Improper installation of the seat will prevent
correct use of the safety belts and could increase the risk of injury.
Refer to the warning label on the seat belt.
Seating and safety restraints
101
Loading ...
Loading ...
Loading ...