Loading ...
Loading ...
Loading ...
11
English
Installing the INTENZA+ water lter
Remove the small white lter from the water tank and store it in a dry place.
Immerse the INTENZA+ water lter vertically (with the opening pointing up) in cold
water and gently press its sides to let any air bubbles out.
Place the INTENZA+ lter in the water tank, ensuring it is correctly in place. Rell
the water tank and place it in its compartment.
Press the CLEAN/SETTING
clean/setting
button, select " SETTINGS ", and then " WATER
FILTER " from the settings menu.
Follow the instructions shown on the display to activate the lter.
Note: you can pause the lter activation procedure by pressing the START/STOP
START/STOP
button. To resume the procedure, press the START/STOP
START/STOP
button again.
Remove the INTENZA+ water lter from the water. Set the machine according to
the detected water hardness (see the "Measuring water hardness" chapter) and the
letters found on the lter base:
A = soft water – 1 or 2 small squares
B = hard water (standard) – 3 small squares
C = very hard water – 4 small squares
Replacing the INTENZA+ water lter
When the INTENZA+ water lter runs out, the display will show an alarm message.
1 Replace or deactivate by pressing the CLEAN/SETTING
clean/setting
button, and then
the " SETTINGS " button.
2 Select the " WATER FILTER " button.
3 Select " REPLACE " to change the lter or " DISABLE " if you do not intend to
use the lter. Conrm with the " " button.
Follow the instructions shown on the display to activate the lter correctly.
START/STOP
ON/OFF
my favourites
HOME
clean/setting
WATER FILTER
REPLACE
ACTIVATE
DISABLE
START/STOP
ON/OFF
my favourites
HOME
clean/setting
Filter expired, replace
or disable it
4219-450-06381 MAN. GAG. CADORNA Style_Plus EN-NL-PL Rev 01.indd 11 23/10/2020 11:32:25
Loading ...
Loading ...
Loading ...