Loading ...
Loading ...
Loading ...
Warning and safety instructions
8
The connection data (voltage and frequency) on the data plate of the
oven must match the mains electricity supply in order to avoid the risk
of damage to the oven. Compare this before connecting the appliance
to the mains electricity. If in any doubt, consult a qualified electrician.
Multi-socket adapters and extension leads do not guarantee the
required safety of the appliance. Do not use these to connect the
oven to the mains electricity supply.
For safety reasons, the oven may only be used when it has been
fully installed.
This oven must not be installed and operated in mobile
installations (e.g. on a ship).
Risk of injury due to electric shock. Any contact with live
connections or tampering with the electrical or mechanical
components of the oven will endanger your safety and may lead to
appliance malfunctions.
Do not open the oven housing under any circumstances.
The manufacturer's warranty will be invalidated if the appliance is
not repaired by a Miele approved service technician.
Miele can only guarantee the safety of the appliance when original
Miele spare parts are used. Faulty components must only be
replaced by original spare parts.
If the oven is delivered without a mains connection cable, a
special cable must be installed by a suitably qualified and competent
person (see “Installation - Electrical connection”).
If the mains connection cable is damaged, it must be replaced with a
special connection cable by a suitably qualified and competent person
(see “Installation - Electrical connection”).
During installation, maintenance and repair work, e.g. if the oven
lighting is faulty, the oven must be completely disconnected from the
electricity supply (see “Problem solving guide”). To ensure this:
– Switch off the mains circuit breaker, or
– switch off at the wall socket and withdraw the plug. To do this,
pull the plug and not the mains connection cable.
Loading ...
Loading ...
Loading ...