Loading ...
Loading ...
Loading ...
Auto-Up Feature With Auto-Reverse Protection — If
Equipped
Pull the window switch for approximately one second,
release and the window will go up automatically.
To stop the window during an Auto-Up operation, push or
pull again the window switch.
To close the window part way, pull the window switch
briefly and release it when you want the window to stop.
NOTE:
• If the window runs into any obstacle during Auto-
Closure, it will reverse direction and then go back down.
Remove the obstacle and use the window switch again
to close the window.
• Any impact due to rough road conditions may trigger
the Auto-Reverse function unexpectedly during Auto-
Closure. If this happens, pull the switch and hold to
close the window manually.
WARNING!
There is no auto-reverse protection when the window
is almost closed. Be sure to clear all objects from the
window before closing.
Resetting The Auto-Up Feature
Should the Auto-Up feature stop working, the window
probably needs to be reset. To reset Auto-Up:
1. Pull the window switch up to close the window com-
pletely and continue to hold the switch up for an
additional two seconds after the window is closed.
2. Push the window switch down to open the window
completely and continue to hold the switch down for an
additional two seconds after the window is fully open.
Wind Buffeting
Wind buffeting can be described as the perception of
pressure on the ears or a helicopter-type sound in the ears.
Your vehicle may exhibit wind buffeting with the windows
down, or the sunroof (if equipped) in certain open or
partially open positions. This is a normal occurrence and
can be minimized. If the buffeting occurs with the rear
windows open, open the front and rear windows together
to minimize the buffeting. If the buffeting occurs with the
sunroof open, adjust the sunroof opening to minimize the
buffeting or open any window.
3
GETTING TO KNOW YOUR VEHICLE 63
Loading ...
Loading ...
Loading ...