Loading ...
Loading ...
Loading ...
7
Setting month, date and time
a. Switch o the device for the date/time setting.
b. Press set button (4) to start the year setting, then the
“year” will blink on display. Press (3) to adjust year by
1 step.
c. Press set button (4) to start the month setting, then the
“month” will blink on display, user can press adjust (3) to
adjust month by 1 step.
d. Press set button (4) to start the day setting, then the
“day” will blink on display, user can press adjust (3) to
adjust day by 1 step.
e. Press set button (4) to start the hour setting, then the
“hour” will blink on display, user can press adjust (3) to
adjust hour by 1 step.
f. Press set button (4) to start the minute setting, then the
“minute” will blink on display, user can press adjust (3)
to adjust minute by 1 step.
g. Press set button (4) to end all the date/time setting, all
blinking stops.
Note: Holding the adjust button will scroll the value.
Taking a measurement
Wrap the cu around the arm (see “applying the arm cu” section above).
1. Sit upright on the chair to have a correct posture.
2. Press and release start button (1), date/time and current user will be displayed.
3. Set user A/B switch (6) to A for user A or B for user B, LCD display will show user A or B symbol.
4. Press and release the start button (1), all icons on display will be shown for 2 seconds. Air
pressure will automatically pump up to certain pressure level and start measurement.
Do not move or talk in the midst of taking blood pressure measurement. During the measurement,
keep your legs uncrossed and feet at on the oor.
5. After the air pressure has increased, the pulse is detected, the heart rate symbol will start
ashing.
6. LCD Display will show the results and WHO indicator arrow after measurement.
After using the device, turn it o by pressing the start button (1) or automatically after
1 minute.
Memory function
Your blood pressure monitor can store the latest 40 readings for each user.
Storing measurement data
After each blood pressure measurement, the systolic pressure, diastolic pressure, pulse rate and the
time & date of specic day will be automatically stored. Memory #01 is always the most recent one.
Once the memory is full, the oldest values will be overwritten.
Press memory button
M
(2) to review the stored data. The last memory data (sys/dia/pul) with
measurement date/time, IHB and WHO indicator will show on LCD. Press memory button
M
(2) again
to show the previous data. Ensure that the correct user; A or B, is selected before use.
This device is not intended as a substitute for regular check-ups by your doctor, please continue to
visit your doctor on a regular basis for a professional reading.
A
B
A
P
MD
A
B
A
P
MD
A
P
c.
MD
A
P
d.
MD
A
P
MD
e.
A
P
MD
f.
A
P
MD
g.
English
Loading ...
Loading ...
Loading ...