Loading ...
Loading ...
Loading ...
12 OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
Activation and deactivation
Touch for 1 second to activate or deactivate
the appliance.
Automatic switch off
The function deactivates the appliance automatically if:
• All cooking zones are deactivated (
).
• You do not set the heat setting after you activate
the appliance.
• You spill something or put something on the control
panel for more than 10 seconds, (a pan, a cloth, etc).
The sound operates some time and the appliance
deactivates. Remove the object or clean the
control panel.
• The appliance become too hot (e.g. when a saucepan
boils dry). Before you use the appliance again, the
cooking zone must be cool.
• You use incorrect cookware. The symbol
comes on
and the cooking zone deactivates automatically after
2 minutes.
• You do not deactivate a cooking zone or change the
heat setting. After some time,
comes on and the
appliance deactivates. See the Heat Setting display
table below.
The times of Automatic Switch Off
HEAT
SETTING
COOKING ZONE
DEACTIVATES AFTER
-
6 hours
-
5 hours
4 hours
-
1.5 hours
The heat setting
Touch adjacent to the element you want to control
to increase the heat setting. Touch
adjacent to the
element you want to control to decrease the heat setting.
The display shows the heat setting. Touch
and
adjacent to the element you want to control at the same
time to deactivate the cooking zone (does not apply
to WHI954BA).
Automatic heat up
You can get a
necessary heat setting
in a shorter time if you
activate the Automatic
Heat Up function.
This function sets the
highest heat setting
for some time (see
the illustration), and
then decreases to the
necessary heat setting.
To start the Automatic Heat Up function for a
cooking zone:
1. Touch . The symbol comes on in the display.
2. Immediately touch
adjacent to the element you
want to control. The symbol
comes on in
the display.
3. Immediately touch
adjacent to the element you
want to control again and again until the necessary
heat setting comes on. After 3 seconds
comes on
in the display.
4. To stop the function touch
adjacent to the element
you want to control.
Power function
The Power function makes more power available to the
induction cooking zones. The Power function is activated
for 10 minutes at most. After, that the induction cooking
zone automatically sets back to highest heat setting. To
activate, touch
, comes on. To deactivate, touch
or
adjacent to the element you want to control.
Power management
The power management divides the power between two
cooking zones in a pair (see the illustration). The power
function increases the power to the maximum level for
one cooking zone in the pair. It automatically decreases
the power in the second cooking zone to a lower level.
The display for the reduced zone change between
two levels.
Loading ...
Loading ...
Loading ...