Loading ...
Loading ...
Loading ...
17
Soundbar Home Theater Speaker with Bluetooth
www.insigniaproducts.com
Mounting your soundbar on a wall (optional)
You will need:
1 Select a location close to your TV and directly in front of the
viewing/listening position. For best sound quality, choose a location
where sound waves are not blocked by furniture or other obstacles.
2 If you are mounting your soundbar to drywall, use the stud finder to find
the studs and mark the locations.
3 Position the supplied wall mount template to the wall where you want to
mount the soundbar. Make sure that the template is level and note if it’s
aligned with a stud, then tape the template to the wall.
4 Drill two holes into the wall where the template indicates, then remove
the template.
5 If you are mounting on drywall without studs or on concrete, install wall
anchors (not included) into the holes you drilled, using the instructions
that came with your anchors.
Caution
Make sure that you use wall anchors that are suitable
to your wall type if you need to mount the soundbar
to drywall, concrete, or similar wall type.
Notes
• If you have drilled into a stud, wall anchors are
not required.
• If you cannot drill into wall studs and must drill
into drywall, concrete, or another type of wall,
wall anchors are required. See the instructions
that came with your wall anchors to determine
the drill bit size.
Wall mounting template
Level
Stud finder
(optional for wood
stud installation)
Drill and
drill bit
Hammer
Screwdriver
Tape measure
Tape
Screws (2) - #10 x 1½" (3.8 cm) wood
screw (or similar) with approx.
¼" to 3/8" head
Wall anchors (2)
V1 14-0130
LEVELING EDGELEVELING EDGE
Drill a hole here
Drill a hole here
Approx. 1/4 in
(6.8 mm)
Wall
20.43 inches (519 mm)
Tools Needed
Drill two holes in the wall where the template indicates,
then remove the template.
Wall
Wall
Soundbar
If you are mounting on drywall or concrete, insert wall
anchors (not included) into the holes and use a hammer
to make sure that the anchors are flush against the wall.
Align the speaker hanging brackets with the screws,
then hang the soundbar on the screws.
Position the wall mount template on the wall where you
want to mount your soundbar, level the template, then
tape it to the wall.
Note: Make sure that the template is level.
Select a location close to your TV and directly in
front of the viewing/listening position. For best
sound quality, choose a location where sound waves
are not blocked by furniture or other obstacles.
Wall
Anchor
Wall
Screws (2) - #10 x 1 ½"
wood screw (or similar)
Hold a level to the Leveling Edge of this template
Wall mount template
Position holes onto studs behind drywall or use anchors for mounting
Warning: Improper installation can result in serious injury or damage to your soundbar.
If necessary, seek the assistance of a professional.
Wall
anchors (2)
Secure two screws (not included) to the wall or wall anchors
(if required). The screws must protrude from the wall by
about 1/4". Use a #10 wood screw (or similar), 1 1/2" in
length. The screw width must be about 3/16" and the screw
head must be approximately 1/4" to 3/8".
Loading ...
Loading ...
Loading ...