Loading ...
Loading ...
Loading ...
omega altise
7
Heating Mode
Press the MODE button and then the “+” or “-“ buttons to adjust the desired room
temperature by one degree each time. The
icon will be displayed at all times
while in heating mode. The adjustable temperature range is 7
O
C to 35
O
C.
The heat element will work if the room temperature is lower than the set temperature
and will stop if the room temperature is higher than the set temperature.
The “+” or “-“ buttons can also be used to adjust the wind from Cool wind (40W),
Warm wind (1000W) and Hot wind (2000W).
TIMER button:
1. When the heater is in use, you can set the timer to turn off the heater.
2. Press the timer button once, the LED screen will display the default time setting
value of 0.0hr (if the unit has been switched off at the base) or the last time
setting value you have selected.
3. To set the time, press either the + or – buttons to set between 0.5 and 8 hours in
0.5hr intervals.
1. The timer will be set within 5 seconds once you finish pressing the buttons and
will stop flashing. When the set time runs out, the heater will turn off
automatically.
OSC button:
1. Press the OSC button once: The heater will begin oscillating to get better
distribution of heat around your room.
2. Press the OSC button again to turn the oscillation off.
Remote Control
1. To function properly, the remote control must have an unobstructed path to the
receiver on the fan and be within 5 meters.
2. Slide out the battery compartment cover, insert two AAA batteries and close the
battery cover.
Loading ...