Loading ...
Loading ...
Loading ...
10
49-80549-4
REMOVE THE PACKAGING
CAUTION
Wear gloves to protect against sharp
edges.
• Remove the duct covers.
• Remove the hardware bag, literature package and
RWKHUER[HGSDUWV
• Remove and properly discard the protective plastic
wrapping and other packaging materials.
• Remove packing foam from behind the blower.
TOOLS AND MATERIALS REQUIRED
(NOT SUPPLIED)
Pliers
:LUHFXWWHU
stripper
Metal snips
Spirit level
Aluminized
Duct tape
Safety glasses
120V 60Hz. 15 or 20 Amp,
2-wire with ground, properly
grounded branch circuit
Step ladder
Saber saw or Key Hole saw
Phillips screwdriver
Strain relief
for junction
ER[
8” round metal
duct, length to
suit installation
Hammer
(OHFWULFGULOOZLWKµELWV
#2 Phillips and flat head
Flashlight
UL listed wire nuts
Pencil and tape measure
Installation Preparation
PREPARE TO INSTALL THE HOOD
Loading ...
Loading ...
Loading ...