Loading ...
Loading ...
Loading ...
MOTOR SAFETY FILTER CLEANING
WARNING
Electrical Shock Hazard
!Unplug power cord from electrical outlet.
iDo not operate the vacuum cleaner
wlthou! the motor safety filter. Be sure the
filler isdry and properly installed to
prevent motor failure and/or eledrical
shock.
ill ill
MOTOR SAFETY FILTER
Check motor
safety filter
frequentlyand
clean whendirty.
Remove the dust
bag as outlined in
the DUST BAG Filter q
REPLACEMENT Motor Safety
section.
If the filter, located in the bottom of the
dust bag chamber_ isdirty_ remove it by
pulling forward out from under the ribs.
Wash the foam filter in warm soapy
water, rinse and dry thoroughly by
squeezing the filter in your hand and
letting it air dry.
DO NOT wash in the dishwasher.
DO NOT install damp.
Replace the foam filter by sliding it back
into place under the ribs in the dust bag
chamber.
RepJacethe dustbag as outlined in the
DUSTBAG REPLACEMENTsection.
I
,,
The HEPA exhaust filter must be replaced
when dirty. It should be replaced
regularly depending on use conditions.
I
EXHAUST FILTER REPLACEMENT I
I
3. Place new filter cartridge into cover
making sure that airflow arrow on side of
cartridge points into cover.
The filter CANNOT be washed as it will
lose its dust trapping ability.
Note: See PARTS AND FEATURES
for the exhaust filter number.
1, Remove
exhaust fiffer
cover by
pressing the
release tab on
the cover and
rotating out
from vacuum
cleaner,
Release_ _
2. Remove the
filter cartridge
from cover.
Place foam seal of filter against the
vacuum cleaner body.
Exhaust
Filter
Seal Against
Vacuum Cleaner
_Exhaust
Filter
4. Replace the exhaust filter cover by
placing bottom tabs in slots and raising
cover up until it snaps into place
18
Loading ...
Loading ...
Loading ...