Loading ...
Loading ...
Loading ...
I ATTACHMENTS
_1_ CAUTION
DO NOT use the hose when vacuum cleaner
handle is tilted back into the floor cleaning
_osition.
_,lways return the vaccum cleaner to the
upright position before using the hose and
attachments.
Failure to do so may resultin overheating of
the agitator motor and can causethe thermal
protectorto trip
TO USE ATTACHMENTS
1. Place the vacuum cleaner in the
upright position.
2. Remove the hose handle and wand by
removing hose handle from hose holder
and lifting up.
Hose
Hose
Handle
3. Use attachments as needed. See
ATTACHMENT USE TABLE.
FOR ADDITIONAL REACH
Rotate hose
release lever
down to release
hose for
maximum hose
reach.
Hose
Release
Level
CAUTION
When using attachments, be careful notto
overextend the stretch hosewhen reaching.
Trying to reach beyond the hosestretch
capability could causethe vacuum cleaner
to tip over.
_lb CAUTION
DO NOT pull the vacuum cleaner around
the room by the hose. Property damage or
personal injury couldresult. ......
TELESCOPING WAND
1, The wand
length is
adjustable and
requires no
assembly. To
adjust_ simpJy
press the wand
button and slide
the wand to the
desired height.
2. Release button and continue to slide
wand until it locks into position.
COMBINATION BRUSH
The combination brush can be attached
directly to the wand.
Combination_
Use the brush holder without the brush
for greater suction on furniture cushions
or stairs.
Use brush holder with brush for cleaning
loose surfaces such as drapes,
12
Loading ...
Loading ...
Loading ...