Loading ...
Loading ...
Loading ...
6
GB
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
Start-up and use
! The glue applied on the gaskets leaves traces of grease
on the glass. Before using the appliance, we recommend
you remove these with a special non-abrasive cleaning
product. During the first few hours of use there may be a
smell of rubber which will disappear very quickly.
! A few seconds after the hob is connected to the
electricity supply, a buzzer will sound. The hob may now
be switched on.
! If the - or + button is pressed for an extended period
of time, the display scrolls quickly though the power levels
and timer minutes.
Switching on the hob
To switch the hob on, press and hold the button for
approximately one second.
Switching on the cooking zones
Each cooking zone is controlled using a selector button
and a power adjustment device consisting of a
double
- and + button.
• To begin operating a cooking zone, press the
corresponding control button and set the desired
power level (between 0 and 9) using the buttons
- and
+.
Power function
The power function for the cooking zones may be used
to shorten heating-up times. Activate and set the power
level for the desired cooking zone
as described in the
previous paragraph. Press and hold the selector button
corresponding to the desired cooking zone
for at
least 2 seconds. The display, the power level indicator,
will alternately show the letter “P” and the power level
set previously until the desired power level has been
reached. Once this level has been reached, the display
will revert to showing the set power level. To deactivate
this function, press and hold – for at least 2 seconds - the
selector button corresponding to the cooking zone on
which the
function has been activated; alternatively,
select a different power level using the buttons
- and +.
Switching off the cooking zones
To switch off a cooking zone, select it using the
corresponding selector button
and:
• Press the
- button: the power of the cooking zone will
progressively decrease until it is switched off.
Heating elements
Two types of heating element may be installed, depending
on the appliance model: halogen and radiant elements.
Halogen elements emit heat via radiation from the halogen
lamps they contain.
They have similar properties to gas burners: they are easy
to control and reach set temperatures quickly, allowing
you to see the power level instantly.
Radiant elements consist of a series of coils which allow
heat to be distributed evenly at the base of the cookware,
so that all slow-flame cooking may be performed
successfully, for example stews, sauces or reheated
dishes.
Programming the cooking duration
! All the cooking zones may be programmed
simultaneously, for a duration between 1 and 99 minutes.
1. Select the cooking zone using the corresponding
selector button.
2. Adjust the power level of the cooking zone.
3. Press the
programming button. The indicator light
corresponding to the selected zone will start flashing.
4. Set the cooking duration using the - and + buttons.
5. Confirm by pressing the
button or automatic
selection occurs after 10 seconds.
The timer begins counting down immediately. A buzzer
sounds for approximately 1 minute and the cooking
zone switches off when the set programme has finished.
Repeat the above procedure for each hotplate you wish
to programme.
Using multiple programmes and the display
If one or more hotplates are programmed, the display
will show the data for the hotplate with the least time
remaining, and the light corresponding to the position of
the hotplate will flash.
The lights corresponding to the other hotplates programmed
will be switched on.
To visualise the time remaining for the other programmed
hotplates, press the
button repeatedly: the time
Loading ...
Loading ...
Loading ...