CRC641DB Instructions for Installation and Use

Loading ...

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

Three-phase 400

Connecting the electricity supply cable to the mains

If the appliance is being connected directly to the

electricity mains an omnipolar switch must be installed

with a minimum opening of 3 mm between contacts.

! The installer must ensure that the correct electrical

connection has been made and that it is fully compliant

with safety regulations.

Before connecting the appliance to the power supply,

make sure that:

• The appliance is earthed and the plug is compliant

with the law.

• The socket can withstand the maximum power of the

appliance, which is indicated on the data plate located

on the appliance itself.

• The voltage falls within the range of values indicated

on the data plate.

• The socket is compatible with the plug of the

appliance. If the socket is incompatible with the plug,

ask an authorised technician to replace it. Do not use

extension cords or multiple sockets.

! Once the appliance has been installed, the power supply

cable and the electrical socket must be easily accessible.

! The cable must not be bent or compressed.

! The cable must be checked regularly and replaced by

authorised technicians only.

! The manufacturer declines any liability should these

safety measures not be observed.

! Do not remove or replace the power supply cable for any

reason. Its removal or replacement will void the warranty

and the CE marking. INDESIT does not assume liability for

accidents or damage arising from replacement/removal

of the original power supply cable. Replacement can only

be accepted when carried out by personnel authorised

by INDESIT and using an original spare part.

U-bolt

connection support

Neutral

Earth

Phase Phase Phase

Extendable cooking zones

Certain models are fitted with extendable cooking zones.

These may be circular or oval and may vary in their

extensibility (they may be double or triple hotplates). A list

of controls is given below (these controls are only present

in models with the extendable cooking zone option).

Circular extendable hotplate

• DOUBLE HOTPLATE ON button switches on the

double hotplate (see Start-up and use).

• DOUBLE HOTPLATE ON indicator light shows the

double hotplate has been switched on.

DOUBLE

HOTPLATE ON

indicator light

DOUBLE

HOTPLATE ON

button

Loading ...

Instructions for Installation and Use - Page 5