Loading ...
Loading ...
Loading ...
28
Setting the cleaning function
Before setting the cleaning function, ensure that you
have followed all instructions for preparation.
The duration of the cleaning function is preset to 1 hour.
It cannot be changed.
1.
Touch the menu field.
The list of operating modes is displayed.
2.
Touch the "EcoClean" text field.
3.
Press the Start/Stop button l to start.
The cooking time will count down on the display. The
heating line does not appear for the cleaning function.
The cleaning function starts.
Ventilate the kitchen when the cleaning function is
running.
When the cleaning function has ended, an audible signal
sounds. The cooking time 00 m 00 s is shown in the
display. Press the
ÿ On/Off button to switch off the
appliance.
Setting a later end time
You can set a later end time. Before starting the
appliance, touch the "End" text field and set a later end
time using the rotary selector.
The appliance switches to standby after it is started. The
end time can no longer be changed.
Cancelling
If you would like to cancel the cleaning function, switch
the appliance off using the
ÿ On/Off button. You can no
longer pause the operation using the l Start/Stop
button.
Note: The operating hour counter is not reset. The
instruction for the cleaning function is still shown on the
display.
Once the cleaning function has ended
Once the cooking compartment has cooled down, wipe
down the cooking compartment with a damp cloth if
necessary.
Note: During operation and while the cleaning function
is active, reddish patches may form on the surfaces. This
is not rust, but food residues. These patches are not
hazardous to your health and do not limit the cleaning
capacity of the self-cleaning surfaces.
Rails
With good care and cleaning, your appliance will retain
its appearance and remain fully functioning for a long
time to come. This will tell you how to remove the shelves
and clean them.
Detaching and refitting the rails
9 WARNING
RISK OF BURNS
The rails become very hot. Never touch the hot rails.
Always allow the appliance to cool down. Keep
children away from the appliance.
Detaching the rails
1.
Lift the rail slightly at the front ‚ and detach it ƒ
(figure !).
2.
Then pull the whole rail to the front and remove it
(figure ").
Clean the rails with cleaning agent and a sponge. For
stubborn dirt deposits, use a brush.
Attaching the rails
The rails only fit on the right or the left side. For both rails,
ensure that the curved rods are at the front.
1.
First, insert the rail in the middle into the rear socket ‚,
until the rail rests against the cooking compartment
wall, and push it back slightly ƒ (figure !).
2.
Then insert the rail into the front socket „, until the rail
also rests against the cooking compartment wall here
and press it downwards … (figure ").
2
1
D
E
2
F
G
1
D
E
Loading ...
Loading ...
Loading ...