Loading ...
Loading ...
Loading ...
7
English
Assembling Your Bowl Lift Mixer
To Attach Bowl
1. Be sure speed control is 0 (OFF)
and Stand Mixer is unplugged.
2. Place bowl lift lever in down
position.
3. Fit bowl supports over locating
pins.
4. Press down on back of bowl
until bowl pin snaps into spring
latch.
5. Raise bowl before mixing.
6. Do not remove ground feature.
To Raise Bowl
1. Rotate lever to straight-up
position.
2. Bowl must always be in raised,
locked position when mixing.
To Lower Bowl
1. Rotate lever back and down.
To Remove Bowl
1. Be sure speed control is 0 (OFF)
and Stand Mixer is unplugged.
2. Place bowl lift handle in down
position.
3. Remove flat beater, wire whip,
or spiral dough hook.
4. Grasp bowl handle and lift straight
up and off locating pins.
To Attach Flat Beater, Wire Whip,
or Spiral Dough Hook
1. Slide speed control to 0 (OFF)
and unplug.
2. Slip flat beater on beater shaft.
3. Turn beater to right, hooking
beater over the pin on shaft.
4. Do not remove ground feature.
To Remove Flat Beater, Wire Whip,
or Spiral Dough Hook
1. Slide speed control to 0 (OFF)
and unplug.
2. Press beater upward and turn
to the left.
3. Pull beater from beater shaft.
Household Stand Mixer
Speed Control
Do not remove ground feature. Speed
control lever should always be set on
lowest speed for starting, then gradually
moved to desired higher speed to avoid
splashing ingredients out of bowl. See the
Speed Control Guide section.
Pin
W10508890A.indd 7 10/12/2012 3:24:07 PM
Loading ...
Loading ...
Loading ...