Loading ...
Loading ...
Loading ...
8
Remote Control Operation
Installing or Replacing the Battery
1. On the rear of the remote control, use a coin to turn the
battery cover slightly counterclockwise and remove the battery
cover.
2. Install one “CR2032” battery as shown. Make sure that
proper polarity (+ or -) is observed. The Positive (+) side of
the battery should be facing upwards.
3. Place the cover back and turn it clockwise until it locks
into place.
The remote control is only designed to operate this device. It is not a universal
remote control and will not operate any other device.
Warning/Caution on using batteries
• Always ensure that the battery is inserted with the positive and negative
terminals in the correct direction as shown in the battery compartment.
• If the remote control fails to function, replace the battery before seeking
repairs at the dealer.
• Keep batteries out of the reach of children. Should the battery be
swallowed, immediately consult a doctor. When disposing of used
batteries, please comply with governmental regulations or environmental
public institution rules that apply in your country/area.
• Remove the battery if the remote control is not used for a month or longer
to avoid corrosion and damage to the remote control.
Loading ...
Loading ...
Loading ...