Loading ...
Loading ...
Loading ...
EN
19
WiFi
The WiFi settings menu allows for changing
the name (SSID) and password of the wireless
access point as well as toggling Client Mode.
In the Access Point Mode settings, a user is able
to change the default SSID (network name) and
password for the wireless access point.
Client Mode allows the system to connect to another wireless access point. This is useful for
features that require Internet access, such as “Slingplayer”. To use Client Mode, enter the
“WiFi” settings menu and select “Client Mode”. Turn on the “Status” switch at the top of the
menu by highlighting it and pressing “Select”. The switch will turn green when on. Once on,
the system will begin searching for available wireless access points and display them under
“Available Devices”. Navigate down to this list, highlight, and select the network. Enter the
password for the network (if necessary) and the system will connect. Once connected, the
system will automatically connect to the last connected network until Client Mode is disabled,
as long as it is available and the credentials have not changed.
NOTE: Using client mode will use data from the selected WiFi access point. Use with care
when using with mobile data plans.
Language
The system language can be changed to any
one of the seven available languages. These
languages include: English, Spanish, French,
Arabic, Simplied and Traditional Chinese, and
Hebrew. The “Language” menu is located in the
“Advanced” menu under “Settings”.
To change the language, highlight and select the current language and a drop-down list will
appear containing the available languages. Navigate down the list and select the intended
language. Next, there will be a prompt, select “Yes” to verify the change. The system will
reboot to apply the changes.
Display
The “Display” settings are similar to the settings
found in the “Context Menu” when viewing video
content and can be accessed from the “Settings”
menu. These settings include Backlight,
Brightness, Contrast, and Tint.
To adjust, select one of the settings from the menu then use the “Up” and “Down” buttons to
control the level of adjustment. Each setting has a range of 0 to 100 and can be adjusted in
increments of 5.
Reset
This will reset every item and option in the RSE back to all factory defaults. Any user options
and customizations will be lost and reset back to factory default settings.
General Operating Instructions
Loading ...
Loading ...
Loading ...