EHG643BA User Manual

Loading ...

CAUTION!

Ensure the appliance is off and cool before cleaning.

Enamel (on burner skirts and trivets)

Persistent stains may require rubbing with a nylon

scourer or creamed powder cleansers. Household

enamelcleanersareavailable,followthemanufacturer’s

instructions in their use. Harsh abrasive cleaners,

powder cleaners, steel wool or wax polishes should

not be used.

Stainless steel

(Models with Stainless Steel hob)

Simply wipe with a soft cloth using warm water and a mild

detergent and rinse with clean water. Where stainless steel

hasbecomeextremelydirtyordiscoloured,useastainless

steel cleaner – but be sure to follow the brushing lines.

CAUTION!

DO NOT use abrasive cleaners or harsh solvents.

IMPORTANT!

Scrapers are to be used on ceramic models only

Ceramic glass

(on models with glass hob)

The specially treated glass in the product is

manufactured using the latest technology to the highest

possible standards for both safety and reliability.

However,itmustberememberedthatasitisCERAMIC

GLASS,itmaybreak.Treatitaccordingly.Toclean

the ceramic glass hob use a soft cloth or sponge with

detergent and warm water.

CAUTION!

Ifthesurfaceiscracked,switchofftheappliance

immediately to avoid the possibility of electric shock.

If the hob is very soiled:

1. Remove soilage using the razor blade scraper.

2. Use a hob cleaner product after there has been

sufcienttimeallowedforthehobtocool.Shakethe

bottle and apply a small quantity of cleaner directly

onto the hob. Rub clean using a damp cloth or

paper towels.

3. Use a damp cloth to remove all remaining traces of the

cleaner,whichcouldotherwiseburnonwhenthehob

is next used. Wipe the hob dry.

CAUTION!

Use the scraper supplied to remove spillages

immediately, while the hob is still hot! Especially

sugar and foods with a high sugar content (eg. jam),

melted plastics and foil, all of which can damage

the hob if left.

CLEANING AND CARE

Razor blade scraper

Use the scraper to remove spillages from the ceramic hob.

How to use the razor blade scraper:

1. Pull back the protective cover until the blade is visible.

2. Make sure that the razor blade is clean and not worn.

Thereisarisk,otherwise,thatitmightdamagethe

hob. New razor blades can be bought

from pharmacies.

3. Angle scraper at approx. 45° and scrape away the

spillage. The razor blade can be pressed down hard

onto the hob without causing any damage.

4. Carefully clean the blade by wiping it with a

paper towel.

5. Whenyouhavenished,presstheprotectivecover

forwards as far as it will go. Keep the scraper out of

the reach of children.

Changing the razor blade:

1. Open the scraper by completely unscrewing the screw

and then place the new razor blade at the front edge.

2. Put the scraper together again and screw the screw

back into place.

3. Press the protective cover forwards as far as it will go

to cover the razor blade.

CAUTION!

THE RAZOR BLADE SCRAPER SHOULD

BE KEPT WELL OUT OF THE REACH OF

CHILDREN. Use the razor blade scraper

carefully, as the razor blade is extremely sharp.

Trivets and burners

These can all be lifted off and removed for separate

cleaning.

NOTE! When refitting the burners, ensure that they are

correctly seated.

Ensure burners are thoroughly dried after cleaning or

spillage.Whencleaningtheburners,ensurethatallthe

ﬂame ports are free of any blockage (refer to Figure

1bonpage4).Ifnecessary,useatoothpickorbrush

to clear ports. The outer surface of the burner caps

haveapolishednishandextracareneedstobetaken

to avoid scratching this surface during cleaning. In

instancesofheavysoiling,itmaybenecessarytoapply

a non-abrasive cleaning compound and rub with a cloth

untilthesoilingisremovedandthennishwithasoft,

dry cloth.

NOTE! DO NOT place trivets or burners in the

dishwasher.

Ignition spark plug and flame safeguard sensor

GENTLY clean the ignition spark plug and ﬂame

safeguard sensor with a damp cloth to avoid lighting

difculties.Ensurethattheyaredrybeforeuse.

Injector

Ensure the injector remains free of any foreign material.

Ifnecessary,useathinpieceofwiretocleartheorice.

Loading ...

User Manual - Page 10