Loading ...
Loading ...
Loading ...
After confirming that the belt is
locked, grab the shoulder part of
the belt near the buckle, and pull
up to remove any slack fromthe
lap part of the belt. Remember, if
thelappart of the belt is not tight,
the child seat will not be secure.
Push and pull the child seat
forward and from side-to-side to
verify that it is secure enough to
stay upright during normal driving
maneuvers. If the child seat is not
secure, unlatch the belt, allow it to
retract fully, then repeat these
steps.
To remove slack, it may help to
putweightonthechildseat,or
push on the back of the seat while
pulling up on the belt.
To deactivate the locking
mechanism andremove a child seat,
unlatch the buckle, unroute the seat
belt, and let the belt fully retract.
A child seat with a tether canbe
installed in any seating position in
theback seat,using one of the
anchorage points shown above.
Since a tether can provide additional
security to the lap/shoulder belt
installation, we recommend using a
tether whenever one is required or
available.
4. 5.
Installing a Child Seat with a
Tether
Installing a Child Seat
46
COVER
ANCHORAGE POINTS
ANCHOR
０５／０９／０９ １８：０３：３０ ３１ＳＮＣ６００ ００４９
Main Menu
Table of Contents
Loading ...
Loading ...
Loading ...