Loading ...
Loading ...
Loading ...
12 49-60767-1
AutoFill Pitcher/Drawers
Column Refrigerator and Freezer Units
AutoFill
Pitcher
(on some
models)
Refrigerator
Drawer
removal
The AutoFill pitcher is designed for
hands-free, refilling of the pitcher for a
constant supply of fresh water.
1. Place the lid onto the pitcher so it fits
securely. Align the notch in the pitcher
lid to the dispenser guide in the top of
the refrigerator and slide the pitcher
toward the back of the refrigerator
until it stops.
There may be up to a 5
second response time before water
starts to fill the pitcher.
2. Water will fill the pitcher until it
reaches a specified level and will
then shut off. It is normal for the
water level to be below the top of the
pitcher.
NOTE: If you remove the pitcher
before the water stops, water may
drip on the shelf.
When you replace the pitcher back
under the dispenser, it will refill the
pitcher back to the specified level.
Drawers in the refrigerator will stop
before coming all the way out, to
help prevent contents from spilling
onto floor.
To remove a drawer: Pull the
drawer out and press the snaps at
the front of both sides to release
the drawer. Lift the front of the
drawer up while pulling forward
to move the pan free of the back
slide hooks.
To replace a drawer: Place the
back of the pan under the hooks
on the back of the slides. Rotate
the drawer down until the front
snaps are securing the front of the
pan.
Snaps to
release drawer
Back hooks
Notch
in top of
pitcher
Dispenser guide
Loading ...
Loading ...
Loading ...