Loading ...
Loading ...
Loading ...
Normal Daily Use Cleaning
ONLY use CERAMA BRYTE
®
Ceramic
Cooktop Cleaner on the glass cooktop.
Other creams may not be as effective.
To maintain and protect the surface of
your glass cooktop, follow these steps:
Before using the cooktop for the
first time, clean it with CERAMA
BRYTE
®
Ceramic Cooktop Cleaner.
This helps protect the top and makes
clean-up easier.
Daily use of CERAMA BRYTE
®
Ceramic Cooktop Cleaner will help
keep the cooktop looking new.
Remove the burner grates.
Shake the cleaning cream well. Apply
a few drops of CERAMA BRYTE
®
Ceramic Cooktop Cleaner directly to
the cooktop.
Use a paper towel or CERAMA
BRYTE
®
Cleaning Pad for Ceramic
Cooktops to clean the entire cooktop
surface.
Use a dry cloth or paper towel
to remove all cleaning residue.
No need to rinse. Be sure no excess
residue is left on the electrodes or
burner parts.
NOTE: It is very important that you DO NOT heat
the cooktop until it has been cleaned thoroughly.
Burned-On Residue
WARNING: DAMAGE to your glass surface may
occur if you use scrub pads other than those
recommended.
Allow the cooktop to cool.
Remove the burner grates. Spread
a few drops of CERAMA BRYTE
®
Ceramic Cooktop Cleaner to the
entire burned residue area.
Using the included CERAMA BRYTE
®
Cleaning Pad for Ceramic Cooktops,
rub the residue area, applying
pressure as needed.
If any residue remains, repeat the
steps listed above as needed.
For additional protection, after all
residue has been removed, polish the
entire surface with CERAMA BRYTE
®
Ceramic Cooktop Cleaner and a
paper towel.
The CERAMA BRYTE
®
Ceramic
Cooktop Scraper and all
recommended supplies are
available through our Parts Center.
See instructions under “To Order
Parts” section on next page.
NOTE: Do not use a dull or
nicked blade.
Clean your cooktop after
each spill. Use CERAMA
BRYTE
®
Ceramic Cooktop
Cleaner.
Heavy, Burned-On Residue
Allow the cooktop to cool.
Remove the burner grates.
Use a single-edge razor blade scraper
at approximately a 45° angle against
the glass surface and scrape the soil.
It will be necessary to apply pressure
to the razor scraper in order to
remove the residue.
After scraping with the razor scraper,
spread a few drops of CERAMA
BRYTE
®
Ceramic Cooktop Cleaner to
the entire burned residue area. Use
the CERAMA BRYTE
®
Cleaning Pad
to remove any remaining residue.
For additional protection, after all
residue has been removed, polish the
entire surface with CERAMA BRYTE
®
Ceramic Cooktop Cleaner and a
paper towel.
Use a CERAMA BRYTE
®
Cleaning
Pad for Ceramic Cooktops or a
Scotch-Brite
®
Multi-Purpose No
Scratch blue scrub pad.
Cleaning the glass cooktop. (on some models) www.GEAppliances.com
Consumer SupportInstallation Instructions Troubleshooting TipsOperating InstructionsSafety Instructions
35
Loading ...
Loading ...
Loading ...