Loading ...
Loading ...
Loading ...
2-11
E
EJU00360a
QSTS (Quick Shift Trim System)
The trim angle of your water vehicle can be
adjusted by operating the Q.S.T.S.
Operating the trim shifting grip
1
changes
the angle of the jet (output) nozzle at the
stern. The nozzle angle changes the trim
angle of the vehicle to one of five positions.
N
O
TE:
There are two positions
A
and
B
for bow
down, neutral “N”, and two positions
C
and
D
for bow up.
Changing the trim angle of the vehicle
1) Set the throttle lever to half open
(3,000 r/min) or less.
2) Squeeze and hold the shift lock lever
2
.
Then turn the trim shifting grip to the
desired position.
●
●●
●
Turning the grip to
A
or
B
from “N”:
Bow will go down while the vehicle is
on plane.
●
●●
●
Turning the grip to
C
or
D
from “N”:
Bow will go up while the vehicle is on
plane.
3) Release the shift lock lever to lock the
position.
ECJ00049
CAUTION:
Do not turn the trim shift grip while oper-
ating the vehicle at full throttle, otherwise
damage could occur to the Q.S.T.S.
The Neutral (“N”) shift position will provide
good performance for most conditions. To
enhance particular types of performance,
choose the one of the “Bow Down” or “Bow
Up” positions.
Chap2.fm Page 11 Thursday, March 30, 2000 2:14 PM
Loading ...
Loading ...
Loading ...