Loading ...
Loading ...
Loading ...
49-85234
27
Problem Possible Cause What To Do
Top burners do not light
or do not burn evenly.
(The front right burner
is designed to have
slightly smaller flames
between the 6 and 9
o’clock positions. This
is normal.)
Plug on range is not
completely inserted in the
electrical outlet.
Make sure electrical plug is plugged into a live, properly
grounded outlet.
Burner slits on the side of
the burner may be clogged.
Remove the burners and clean them. Check the electrode area
for burned-on food or grease. See the Care and cleaning of the
range section.
Improper burner assembly.. Make sure the burner parts are installed correctly. See the
Care and cleaning of the range section.
Burner flames very large
or yellow
Improper air to gas ratio. ,IUDQJHLVFRQQHFWHGWR/3JDVFRQWDFWWKHSHUVRQZKR
installed your range or made the conversion.
Surface burners light
but oven does not
The oven gas shut-off valve
may have accidentally been
moved during cleaning or
moving.
7RFKHFNWKHRYHQJDVVKXWRIIYDOYHUHPRYHWKHGUDZHUVHH
WKH&DUHDQGFOHDQLQJRIWKHUDQJHVHFWLRQ)RUORZHURYHQ
drawer models, remove the rear access panel by unscrewing
the thumb screws in the upper left and right corners. Look for
the gas shut-off lever at the back of the range.
Burners do not light Plug on range is not
completely inserted in the
electrical outlet.
Make sure electrical plug is plugged into a live, properly
grounded outlet.
Gas supply not connected or
turned on.
6HHWKH,QVWDOODWLRQ,QVWUXFWLRQVWKDWFDPHZLWK\RXUUDQJH
A fuse in your home may be
blown or the circuit breaker
tripped.
Replace the fuse or reset the circuit breaker.
Burner parts not replaced
correctly.
See the Care and Cleaning of the range section.
Lock Controls or
Control Lockout feature
is activated
,ILOC ON appears in the display, the range control is locked.
Turn this feature off to use the range. See the Lock Control
feature in the Oven Controls section.
Control signals after
entering cooking time or
start time
You forgot to enter a bake
temperature or cleaning time.
Touch the Bake pad and desired temperature or the Self
Clean pad and desired clean time.
“Close Door” scrolls in
the display when BROIL
is set
The display will always
automatically remind you to
close the door.
This is a normal reminder to close the door when broiling.
“Probe” appears in the
display
This is reminding you to
enter a probe temperature
after plugging in the probe.
Enter a probe temperature.
LOC appears in display The Gas/Control Lockout
feature is activated
Be sure the surface burner controls are turned OFF. Turn this
IHDWXUHRIIWRXVHWKHUDQJH6HHWKH*DV&RQWURO/RFNRXW
section.
Fan noise The convection fan may turn
on and off automatically.
This is normal. The convection fan will run until the function is
over or the door is opened.
Convection fan not
working
Preheat temperature not
reached.
Fan will start automatically once the preheat temperature is
reached.
Troubleshooting tips ... Before you call for service
TROUBLESHOOTING TIPS
Lever is
shown closed.
PULL TO OPEN.
Sealed burner models
Loading ...
Loading ...
Loading ...