Loading ...
Loading ...
Loading ...
continue to be met until the shift has been completed.
If any of these requirements are not met before push-
ing the NEUTRAL (N) button or are no longer met
during the shift, the NEUTRAL (N) indicator light will
flash continuously until all requirements are met or
until the NEUTRAL (N) button is released.
• The ignition switch must be in the ON/RUN position
for a shift to take place and for the position indicator
lights to be operable. If the ignition switch is not in the
ON/RUN position, the shift will not take place and no
position indicator lights will be on or flashing.
• A flashing NEUTRAL (N) position indicator light
indicates that shift requirements have not been met.
Shifting Out Of NEUTRAL (N)
Use the following procedure to prepare your vehicle for
normal usage.
1. Bring the vehicle to a complete stop, leaving it con-
nected to the tow vehicle.
2. Firmly apply the parking brake.
3. Turn the ignition switch to the ON/RUN position, but
do not start the engine.
4. Press and hold the brake pedal.
5. Shift the transmission into NEUTRAL.
• With manual shift transfer case, shift the transfer
case lever to the desired position.
•
With electronic shift transfer case, press and hold the
transfer case NEUTRAL (N) button until the NEUTRAL
(N) indicator light turns off. After the NEUTRAL (N)
indicator light turns off, release the NEUTRAL (N)
button. After the NEUTRAL (N) button has been re-
leased, the transfer case will shift to the position indi-
cated by the selector switch.
460 STARTING AND OPERATING
Loading ...
Loading ...
Loading ...