Loading ...
Loading ...
Loading ...
All Two-Wheel Drive Vehicles And Four-Wheel
Drive Vehicles In 2WD, 4WD AUTO, Or 4WD
LOCK Modes Can Choose The Following ESC
Operating Modes:
ESC On
This is the normal operating mode for ESC in 2WD/4WD
AUTO/4WD LOCK modes and in 2WD vehicles. When-
ever the vehicle is started or the transfer case (if
equipped) is shifted from 4WD LOW or Neutral, back to
4WD LOCK or 4WD AUTO, the ESC system will be in
this mode. This mode should be used for almost all
driving situations. ESC should only be turned to ⬙ESC
Partial Off⬙ or “ESC Full Off” for specific reasons as noted
below.
ESC Partial Off
This mode is entered by momentarily pushing the “ESC
Partial Off” switch. When in ⬙Partial Off⬙ mode, the TCS
portion of ESC, except for the “limited slip” feature
described in the TCS section, has been disabled and the
⬙ESC Off Indicator Light⬙ will be illuminated. All other
stability features of ESC function normally. This mode is
intended to be used if the vehicle is in deep snow, sand,
or gravel conditions and more wheel spin than TCS
would normally allow is required to gain traction. To
turn ESC on again, momentarily push the “ESC Off”
switch. This will restore the normal “ESC On” mode of
operation.
382 STARTING AND OPERATING
Loading ...
Loading ...
Loading ...