Loading ...
Loading ...
Loading ...
27
Coin-slide models: You can install the 30-minute or 60-minute
timing cam (shipped with dryer) as follows:
1. Unplug dryer or disconnect power.
2. Unlock meter case.
3. TurnthetimingcambyhanduntiltheV-shapednotchlines
up below the ratchet tooth.
4. Insertanarrow,at-bladescrewdriverunderthetimingcam
neartheclockshaft.Gentlyliftcamstraightupandoshaft,
makingsurethattheV-shapednotchclearstheratchettooth.
CHANGING TO A 30- OR 60-MINUTE TIMING CAM
(on some models)
WARNING
Electrical Shock Hazard
Disconnect power before making cam changes.
Failure to follow these instructions can result in death
or electrical shock.
5. Placenewcam(hubsidedown)overclockshaft.Lineupat
sideofshaftwithatsideofcamhole.Checkthatdrivelug
is in place.
6. TurncamuntilV-shapednotchlinesupwithratchettooth.
7. Press cam down in place on clock shaft. Make sure that
V-shapednotchclearstheratchettooth.
8. Close and lock the meter case.
9. Plug in dryer or reconnect power.
Ratchet
Tooth
V-Shaped
Notch
Drive Lug
Loading ...
Loading ...
Loading ...