AEG Ceramic Cooker CCB6761ACM

User Manual - Page 11

For CCB6761ACM.

PDF File Manual, 36 pages, Download pdf file

Loading ...
Loading ...
Loading ...
5.2 Setting the time
You must set the time before you
operate the oven.
Only the top oven works
without the set time.
The flashes when you connect the
appliance to the electrical supply, when
there was a power cut or when the timer
is not set.
Press the or to set the correct
time.
After approximately five seconds, the
flashing stops and the display shows the
time of day you set.
5.3 Changing the time
You cannot change the time
of day if the Duration or
End function operates.
Press
again and again until the
indicator for the Time of Day function
flashes.
To set a new time, refer to "Setting the
time".
5.4 Preheating
Preheat the empty oven before first use.
Preheat the two ovens. Heat
up one oven at a time.
Set the functions listed
below, if applicable.
1. Set the function and the
maximum temperature.
2. Let the oven operate for 1 hour.
3.
Set the function and set the
maximum temperature.
4. Let the oven operate for 15 minutes.
5. Set the function and set the
maximum temperature.
6. Let the oven operate for 15 minutes.
7. Turn off the oven and let it cool
down.
Accessories can become hotter than
usual. The oven can emit an odour and
smoke. Make sure that the airflow in the
room is sufficient.
6. HOB - DAILY USE
WARNING!
Refer to Safety chapters.
6.1 Heat setting
Symbols Function
Off position
Double zone
1 - 9 Heat settings
Use the residual heat to
decrease energy
consumption. Deactivate the
cooking zone approximately
5 - 10 minutes before the
cooking process is
completed.
Turn the knob for the selected cooking
zone to a necessary heat setting.
To complete the cooking process, turn
the knob to the off position.
6.2 Activating and
deactivating the outer rings
You can adjust the surface you cook to
the dimension of the cookware.
To activate the outer ring: turn the
knob clockwise through a light resistance
to . Then turn the knob
counterclockwise to the correct heat
setting.
To deactivate the outer ring: turn the
knob to the off position. The indicator
goes out.
6.3 Residual heat indicator
WARNING!
There is a risk of burns from
residual heat.
ENGLISH 11
Loading ...
Loading ...
Loading ...