Loading ...
Loading ...
Loading ...
13. CARE AND CLEANING
WARNING!
Refer to the Safety chapters.
Notes on cleaning:
• Clean the front of the appliance with a
soft cloth with warm water and a clean-
ing agent.
• To clean metal surfaces, use a usual
cleaning agent.
• Clean the oven interior after each use.
Then you can remove dirt more easily
and it does not burn on.
• Clean all oven accessories after each
use and let them dry.
• If you have nonstick accessories, do
not clean them using aggressive
agents, sharp-edged objects or a dish-
washer. It can cause a damage to the
nonstick coating.
13.1 Removing the shelf
supports
You can remove the shelf supports to
clean the side walls.
Lift the shelf support up and pull it out.
Install the shelf supports in the op-
posite sequence.
1
2
2
13.2 Lamp
WARNING!
Danger of electrocution! Discon-
nect the fuse before you replace
the lamp.
The lamp and the lamp glass cov-
er can be hot.
Before you change the lamp:
• Deactivate the appliance.
• Remove the fuses from the fuse box or
deactivate the circuit breaker.
CAUTION!
Put a cloth on the bottom of the
interior of the appliance. It pre-
vents damage to the lamp glass
cover and the cavity.
Always use the same lamp type.
13.3 Replacing the oven lamp
and cleaning the glass cover
To prevent damage to the oven
lamp and the glass cover, put a
cloth on the bottom of the oven.
Always hold the halogen lamp
with a cloth to prevent grease res-
idue from burning on the lamp.
1.
The oven lamp is on the left side of
the oven cavity. Remove the left shelf
support to get access to the lamp.
2.
Turn the lamp glass cover counter-
clockwise to remove it.
3.
Clean the glass cover.
4.
If necessary, replace the oven lamp
with an applicable 300 °C, G9 heat-
resistant oven lamp.
5.
Install the glass cover.
6.
Install the shelf support.
ENGLISH 37
Loading ...
Loading ...
Loading ...