Loading ...
Loading ...
Loading ...
Operating Instructions
Built - In Refrigerators
9
Energy saver
switch
The energy saver switch is located on the
temperature control panel.
To reduce the amount of electricity
required to operate your refrigerator,
push switch to ENERGY SAVER setting.
This turns off the heater in your
refrigerator that prevents moisture from
forming on the outside of the refrigerator.
With the heater turned off, there is a
chance that moisture may form on the
outside of your refrigerator, especially
when the weather is humid.
The humidity is most likely to be high in
the summer, in the early morning hours,
and in homes which are not air
conditioned.
Over an extended period of time,
moisture that forms on the refrigerator
surface may cause deterioration of the
paint finish. It will be important to protect
the finish by using appliance polish wax as
described in the Care and Cleaning
section.
Move the energy saver switch from the
ENERGY SAVER setting and electricity
flows through the low wattage heater
which warms the outside of the
refrigerator. Under most conditions, this
prevents the forming of moisture or water
droplets.
No defrosting
It is not necessary to defrost the freezer or
fresh food compartments. Although your
refrigerator is designed and equipped to
defrost itself automatically, some frost on
packages is normal.
Loading ...
Loading ...
Loading ...