Loading ...
Loading ...
Loading ...
The Problem Solver
Built - In Refrigerators
23
Questions?
Use this
problem
solver!
PROBLEM POSSIBLE CAUSE
Ice clumps form • If you don’t use the ice very often, ice clumps may form
in the storage bin in the storage bin and can clog the dispenser. Remove the
storage bin from the freezer and break up ice clumps with
your hands. Throw away any clumps that you can’t break up.
Water dispenser • Water supply line turned off or not connected.
does not work
• Supply line may be clogged with sediment.
• If no water is dispensed when the icemaker is first installed,
there may be air in the water system. Press the dispenser pad
for at least two minutes to remove trapped air from the
water line and to fill the water system.
Moisture forms on • Not unusual during periods of high humidity. If problem
cabinet surface persists, call for service.
between the doors
Moisture • Too frequent or too long door openings.
collects inside
• In humid weather, air carries moisture into refrigerator
when doors are opened.
Water on the floor • If you use a glass over 6 inches tall, you may be jamming the
cubes in the funnel chute. They can fuse inside the chute
and drop out later, leaving water or ice on the floor.
Rrefrigerator has odor
• Foods with strong odors should be tightly covered.
• Check for spoiled food.
• Interior needs cleaning.
• Keep open box of baking soda in refrigerator; replace every
3 months.
Interior light does • No power at outlet. Call installer or electrician.
not work
• Light bulb needs replacing.
• Check fuse and circuit breaker.
Uneven spacing or
• Kitchen cabinets are not level or square. Call the
gaps between doors installer or cabinetmaker.
and kitchen cabinet
Poor door alignment • Refrigerator not level. Adjust leveling legs so refrigerator
or one door higher is resting solidly on the floor and is level side to side
than the other and front to back.
If you need more help…call toll free:
GE Answer Center
®
, 800.626.2000
consumer information service
Loading ...
Loading ...
Loading ...