Loading ...
Loading ...
Loading ...
▷ Using vehicle equipment.
There is a risk of accidents or injuries. Do not
leave children or animals unattended in the ve‐
hicle. Take the remote control with you when
exiting and lock the vehicle.
Overview
Parking brake
Setting
With a stationary vehicle
Pull the switch.
The LED lights up.
The indicator light lights up red. The
parking brake is set.
Depending on the stopping situation, the parking
brake is engaged automatically.
Steptronic transmission: in some parking situa‐
tions, the parking brake is automatically engaged,
when selector lever position P is engaged. In
these cases, the parking brake is released auto‐
matically when you leave the selector lever posi‐
tion P.
While driving
To use as emergency brake while driving:
Pull the switch and hold it. The vehicle brakes
hard while the switch is being pulled.
The indicator light lights up red, a signal
sounds and the brake lights light up.
A Check Control message is displayed.
If the vehicle is decelerated to a complete stop,
the parking brake is engaged.
Releasing
Releasing manually
1. Switch on the ignition.
2.
Steptronic transmission: press the
switch while the brake is pressed or selector
lever position P is set.
The LED and indicator light go out.
The parking brake is released.
Automatic release in cars with
Steptronic transmission
For automatic release, step on the accelerator
pedal.
The LED and indicator light go out.
The parking brake is automatically released
when you step on the accelerator under the fol‐
lowing conditions:
▷ Engine on.
▷ Drive mode engaged.
▷ Driver buckled in and doors closed.
Malfunction
In the event of a failure or malfunction of the
parking brake, secure the vehicle against rolling
using a wheel chock, for instance when leaving it.
After a power failure
Putting the parking brake into
operation
1.
Switch on the ignition.
Seite 112
CONTROLS
Driving
112
Online Edition for Part no. 01402120596 - II/18
Loading ...
Loading ...
Loading ...