Loading ...
Loading ...
Loading ...
13
Installation instructions
Installation precautions/warnings
DO NOT use with water that is microbiologically unsafe or of unknown quality without adequate
disinfection before or after the system.
WARNING – connect to potable water supply only.
DO NOT install on line pressure above 119 psi (827 kPa) or below 22 psi (150 kPa).
DO NOT use on hot water supply (100°F [38°C max.]).
DO NOT cut any length of tube shorter than 8” (200 mm).
DO NOT install near electrical wires or water pipes that will be in the path of drilling when
selecting the location of filter system.
DO NOT mount filter in such a position so that it will be struck by other items, such as
wastebaskets, etc.
DO NOT install the filter or any water tubing in direct sunlight as prolonged exposure to light can
weaken plastic components.
DO NOT install in a location that is susceptible to freezing temperatures as damage to the
housing could occur.
DO NOT screw filter to the refrigerator.
DO NOT install the filter or any water tubing in high temperature areas eg in a ceiling cavity.
AVOID contamination of pipes during installation.
DO NOT use copper tubing. The plastic tubing supplied should always be used.
DO NOT continuously dispense water for longer than 2 minutes.
Loading ...
Loading ...
Loading ...