Loading ...
Loading ...
Loading ...
Operating 21
Operating
3
4. Select "Speaker name (App setup)".
Speaker
name
y
App setup means that you set the name in
the "Google Home" app. For example, if the
speaker name is set to Smart speaker in the
"Google Home" app, you will see “ Smart
speaker” on your Bluetooth device.
y
You may check and edit the speaker name on
"Google Home" app (Page 23)
y
Depending on the Bluetooth device type,
some device have a different pairing way.
Enter the PIN code (0000) as needed.
,
Note
5. When this unit is successfully connected with
your Bluetooth device, the Function LED will be
solid blue with sound.
6. Listen to music.
To play a music stored on your Bluetooth device,
refer to your Bluetooth device’s user guide.
y
When using Bluetooth technology, you
should be as close and possible when you are
attempting to make a connection between
the unit and a Bluetooth device. You should
also keep the distance close.
However you may experience issues in the
cases below:
- There is an obstacle between the unit and
the Bluetooth device.
- There is a device using same frequency
with Bluetooth technology such as a
medical equipment, a microwave or a
wireless LAN device.
y
If Bluetooth connection does not work
well, go to step 1 of “Pairing your unit and
BLUETOOTH device” and try again.
y
The sound may be interrupted when the
connection has interference from some other
electronic waves.
y
Pairing is limited to one per unit and multi-
pairing is not supported
y
Depending on the type of the device, you may
not be able to use the Bluetooth function.
y
You can enjoy Bluetooth function using
Smart phone, Notebook, etc..
y
The more distance between the unit and the
Bluetooth device, the lower the sound quality
becomes.
y
Bluetooth connection will be disconnected
when the unit is turned off or the Bluetooth
device gets too far from the unit.
y
When Bluetooth connection is disconnected,
connect the Bluetooth device to the unit
again.
y
When you connect Bluetooth device (iOS
device etc.) to this unit or operate the device,
the volume level can be synchronized with
each other.
y
When the unit is not connected, Function LED
(Blue) will blink.
,
Note
Loading ...
Loading ...
Loading ...