Loading ...
Loading ...
Loading ...
30
Customer Care Center, 1-800-898-1879, www.askona.com
STEP 7: END OF PROGRAM
00:00
Drying finished
Auto extra
After the end of the drying program, the
display will indicate that the drying has
been fi nished ("Drying Finished").
Anti crease
Drying finished
Auto extra
If you have selected the "anti-crease"
option, the dryer will continue to operate
after the end of the drying cycle for the
amount of time specifi ed upon selection
of this program setting.
Wash dried
Add to favStart new
Good ECO performance
Auto extra
After the drying cycle, you have the
possibility to save the program as
a favorite program (see "Favourite
programs").
Open the door and remove the laundry from the dryer.
Ok
Clean door filter
Clean the net fi lter in the door
(see chapter "CLEANING AND
MAINTENANCE").
Make sure the dryer drum is empty, then close the door.
5 minutes after the end of the program or last activation, the display will switch off to standby mode in order to
save power.
The display will light up again if you press the ON/OFF button or open the dryer door.
After each drying cycle, clean the net fi lter in the door and empty the condensate tank. See chapter
”CLEANING AND MAINTENANCE”.
A clogged net fi lter and heat pump fi lter may result in activation of the automatic overheating switch-off
device. Clean the fi lter, wait for the machine to cool down, and try running it again. If the dryer still fails to
start, call a service technician.
After the drying process, unplug the dryer power cord from the power outlet.
Loading ...
Loading ...
Loading ...