Loading ...
Loading ...
Loading ...
en-us
6
Instructions on disposal
* Disposal of packaging
The packaging protects your appliance from damage
during transport. All utilized materials are environmentally
safe and recyclable. Please help us by disposing of the
packaging in an environmentally friendly manner.
Please ask your dealer or inquire at your local authority
about current means of disposal.
* Disposal of your old appliance
Old appliances are not worthless garbage! Valuable raw
materials can be reclaimed by recycling old appliances.
, WARNING:
Redundant appliances
1.
Pull out the mains plug.
2.
Cut off the power cord and discard with
the mains plug.
3.
Do not take out the trays and receptacles to
prevent children from climbing in!
4.
To prevent children from locking themselves in
the redundant appliance:
Remove appliance doors!
5.
Do not allow children to play with the redundant
appliance. Risk of suffocation!
Refrigerators contain refrigerant and gases in the
insulation. Refrigerant and gases must be disposed of
professionally. Ensure that tubing of the refrigerant circuit
is not damaged prior to proper disposal.
Contents of package
After unpacking all parts, check for any damage during
transport.
, CAUTION:
Do not set up the appliance if it is damaged.
If there are any problems, please contact the dealer from
whom you purchased the appliance, or our customer
service.
The delivery consists of the following parts:
Free-standing appliance
Interior fittings (depending on model)
Bag containing installation materials
Instruction manual
Installation instructions
Customer service booklet
Warranty enclosure
Information on the energy consumption and noises
Installing the appliance
Have a technician install and connect the appliance
according to the enclosed installation instructions.
, WARNING:
Do not install this appliance:
outdoors,
in an environment with dripping water,
in rooms where there is a risk of frost.
Transport
The appliance is heavy. It must be secured during
transport and installation.
, WARNING:
Due to the appliance's weight and dimensions and
to minimize the risk of injuries or damage to the
appliance, at least two people are needed for safe
installation of the appliance.
Installation location
A dry, well ventilated room is suitable as an installation
location. The installation location should not be exposed
to direct sunlight and not placed near a heat source, e.g.
a cooker, radiator, etc. If installation near a heat source is
unavoidable, use a suitable insulating plate or observe
the following minimum distances to a heat source:
1
1
/
4
" (3 cm) to electric or gas cookers.
11
13
/
16
" (30 cm) to oil or solid-fuel cookers.
The floor of the installation location must not give way; if
required, reinforce floor.
Ventilation
The air on the rear panel and on the side panels of
the appliance heats up. Conduction of the heated air
must not be obstructed. Otherwise the refrigeration unit
must work harder. This increases power consumption.
Therefore: Never cover or block ventilation openings!
Place the enclosed spacers in the designated holders on
the back of the appliance. This ensures that there is
a minimum distance between the appliance and the wall.
Loading ...
Loading ...
Loading ...