Loading ...
Loading ...
Loading ...
With the ON/OFF control in the OFF position, either sliding door can be
operated by pulling the inside or outside handle and sliding the door
back manually. If the vehicle is stopped or parked on a downhill grade,
refer to Manual sliding door in this chapter for more information.
If the vehicle is parked on a
downhill grade, the door
could slam shut and could result
in injury or damage to the door.
Ensure that the open door is
secure against the stop before
allowing passengers to enter or
exit the vehicle.
The left hand PSD will not open (manually or power) if the fuel door is
open regardless of the ON/OFF control position.
Safety/Obstructions
If anything obstructs the Power Sliding Door while it is closing, the door
will automatically reverse to the open position, provided it meets
sufficient resistance.
Resetting the PSD
The power sliding door may operate incorrectly or not at all because of
the following conditions:
• a low voltage or dead battery
• disconnecting the battery
• if the PSD fuse (fuse #6) is removed or blown. Refer to Fuses and
relays in the Roadside emergencies chapter.
If any of the above conditions has occured, preform the following steps
to reset the PSD:
1. Check to see if PSD is unlocked and securely closed.
2. Make sure the gearshift is in (P) Park.
3. Push the PSD control on the overhead console to open the door.
4. Wait five (5) seconds and close the door by pressing the PSD control
on the overhead console.
5. Wait five (5) seconds and repeat Steps 3 and 4 then go on to step 6.
2003 Windstar (win)
Owners Guide (post-2002-fmt)
USA English (fus)
Driver Controls
51
Loading ...
Loading ...
Loading ...