Loading ...
Loading ...
Loading ...
This control also has other features that are activated when any door is
opened:
• Rotate to full up position or next position (adjustment dial) to turn on
all interior lights.
• Rotate to first lower detent position to activate “sleeping baby
mode”— dome lamps will remain off and only the lower lamps will
illuminate.
• The second lower detent position (full down) will shut off all interior
lights.
The dome lamp will not illuminate if the control switch is in the OFF
position.
AIMING THE HEADLAMPS
The headlamps on your vehicle are properly aimed at the assembly plant.
If your vehicle has been in an accident the alignment of your headlamps
should be checked by a qualified service technician.
You will need one E8 Torx socket to make the adjustments.
Vertical aim adjustment
1. Park the vehicle on a level surface approximately 7.6 meters (25 feet)
from a vertical wall or screen directly in front of it.
• (1) Eight feet
• (2) Center height of lamp to
ground
• (3) Twenty five feet
• (4) Horizontal reference line
2. Measure the height from the center of your headlamp to the ground
and mark a 2.4 meter (8 foot) horizontal reference line on the vertical
wall or screen at this height (a piece of masking tape works well). The
center of the lamp is marked by a 3.0 mm circle on the headlamp lens.
3. Turn on the low beam headlamps to illuminate the wall or screen and
open the hood.
2003 Windstar (win)
Owners Guide (post-2002-fmt)
USA English (fus)
Lights
38
Loading ...
Loading ...
Loading ...