Loading ...
Loading ...
Loading ...
7
Steam Cycles
Use Steam Cycles to help smooth out wrinkles from dry items, such
as clothes that have been worn or clothes that have been left in the
dryer too long. When a Steam Cycle is selected, the estimated time
remaining display shows the actual time remaining in the cycle.
NOTE: Res
ults may vary depending on fabric. 100% cotton garments
with wrinkle-free finish may yield better results than those without.
Use of a fabric softener sheet is not
recommended with steam cycles
as it may cause temporary staining on the clothes.
Rapid Refresh Small Load
This cycle is best for smoothing out wrinkles and reducing odors
from loads consisting of one to four dry items of wrinkle-free cotton,
cotton-polyester blend, common knits, and synthetic garments. In
this cycle, a small amount of water is sprayed into the dryer drum
after several minutes of tumbling with heat. The dryer will continue
to tumble with heat followed by a brief cool down. The heat level
and cycle time are not adjustable.
Custom Refresh
This cycle is best for touching up clothes that have been left in the
dryer too long. In this cycle, a small amount of water is sprayed into
the dryer drum after several minutes of tumbling with heat. The dryer
will continue to tumble with heat followed by a brief cool down. The
dry time and temperature can be adjusted for this cycle.
NOTE: Ov
erloading the dryer may not yield the same results.
Steam Preset Cycle Settings
Timed Cycles
Load Type
Default
Temperature*
Default Time
(Minutes)*
RAPID REFRESH
Small Load
Medium 15
CUSTOM REFRESH Medium 20
*Temp Level and Time Adjust are selectable only
for the Custom
Refresh cycle.
NOTE: T
he Custom Refresh cycle has a minimum dry time of
15 minutes and a maximum dry time of 40 minutes.
Only the
Medium and Regular temperature settings can be used for the
Custom Refresh cycle.
Timed Cycles
Use Timed Cycles to select a specific amount of drying time and a
drying temperature. When a Timed Cycle is selected, the Estimated
Time Remaining display shows the actual time remaining in your
cycle. You can change the actual time in the cycle by pressing TIME
ADJUST + (plus) or – (minus). See “Changing Cycles, Modifiers, and
Options.”
NOTE: T
imed Cycles may also be used with the drying rack. See
“Drying Rack Option.”
Timed Preset Cycle Settings
Timed Cycles
Load Type
Default
Temperature
Default Time
(Minutes)
TIMED DRY
Heavyweight, bulky items,
work clothes
High
Regular
40
RAPID DRY
Small loads
Regular
23
FRESHEN UP
(on some models)
Helps to smooth out
wrinkles
Medium 20
Additional Features
Sensor Cycle Modifiers
Use the DRYNESS LEVEL button to select dryness levels for the
Sensor Cycles. Press DRYNESS LEVEL until the desired Dryness
setting illuminates.
The preset dryness setting is Normal w
hen a Sensor Cycle is
selected. You can select a different Dryness Level, depending on
your load, by pressing DRYNESS LEVEL and choosing More,
Normal, Less, or Damp. Selecting More, Normal, Less, or Damp
automatically adjusts the Dryness Level at which the dryer will shut
off. Once a Dryness Level is set, it cannot be changed without
stopping the cycle.
The initial preset temperature is the preferred setti
ng for drying
clothes; however, if desired, one alternate temperature may be
selected to dry the load on a lower heat setting. Once the alternate
temperature has been selected, the next time the same cycle is
selected, the alternate temperature is remembered and displayed.
The original (default) temperature may be reselected. The Delicate
and Bulky cycles (on Steam model) do not offer an alternate
temperature.
NOTE: Dryness
Level selections cannot be used with the Timed or
Steam Cycles.
Timed Cycle Modifiers
Use the TEMP LEVEL button to select temperatures for the Timed
Cycles. Press TEMP LEVEL until the desired temperature setting
illuminates.
Air Fluff
Use the Air Fluff Modifier for items that require drying without heat
such as rubber, plastic, and heat-sensitive fabrics. This table shows
examples of items that can be dried using Air Fluff.
Type of Load
Time*
(Minutes)
Foam rubber - pillows, padded bras, stuffed toys 20 - 30
Plastic - Shower curtains, tablecloths
20 - 30
Rubber - backed rugs 40 - 50
Olefin, polypropylene, sheer nylon 10 - 20
*Reset cycle to complete drying, if needed.
When using Air Fluff
■ Check that coverings are securely stitched.
■ Shake and fluff pillows by hand periodically during the cycle.
■ Dry item completely. Foam rubber pillows are slow to dry.
NOTE: Air Fluff is not available with Sensor Cycles.
Loading ...
Loading ...
Loading ...