Loading ...
Loading ...
Loading ...
10
This chart shows examples of items that can be rack dried and the
suggested cycle, temperature setting, and drying time. Actual drying
time will depend on the amount of moisture items hold.
Rack Dry Setting Temp. Time*
(minutes)
Wool Sweaters
Block to shape and lay flat
on the drying rack.
Timed Dry Low 60
Stuffed toys or pillows
Cotton or polyester fiber
filled
Timed Dry Low
60
Stuffed toys or pillows
Foam rubber filled
Timed Dry Air Fluff
(no heat)
90
Sneakers or canvas shoes Timed Dry Air Fluff
(no heat)
90
*Reset time to complete dr
ying, if needed.
DRYER CARE
Cleaning the Dryer Location
Keep dryer area clear and free from items that would obstruct the
flow of combustion and ventilation air.
Cleaning the Lint Screen
Clean the lint screen before each load. The control panel has an
indicator light to remind you to clean the lint screen before each
load. A screen blocked by lint can increase drying time.
IMPORTANT:
■ Do not run the dryer with the lint screen loose, damaged,
blocked, or missing. Doing so can cause overheating and
damage to both the dryer and fabrics.
■ If lint falls off the screen into the dryer during removal, check the
exhaust hood and remove the lint.
Every load cleaning
1. The lint screen is located in the door opening of the dryer. Pull
the lint screen straight up. Roll lint off the screen with your
fingers. Do not rinse or wash screen to remove lint. Wet lint is
hard to remove.
2. Push the lint screen firmly back into place.
As needed cleaning
Laundry detergent and fabric softener residue can build up on the
lint screen. This buildup can cause longer drying times for your
clothes, or cause the dryer to stop before your load is completely dry.
The screen is probably clogged if lint falls off while the screen is in
the dryer.
Clean the lint screen with a nylon bru
sh every 6 months, or more
frequently, if it becomes clogged due to a residue buildup.
To wash
1. Roll lint off
screen with your fingers.
2. Wet both sides of lint screen with hot water.
3. Wet a nylon brush with hot water and liquid detergent. Scrub
lint screen with the brush to remove residue buildup.
4. Rinse screen with hot w
ater.
5. Thoroughly dry lint screen with a clean towel. Replace screen in
dryer.
Loading ...
Loading ...
Loading ...