Loading ...
Loading ...
Loading ...
ENGLISH
13
CARE & CLEANING
Always follow all safety precautions when cleaning and servicing the vacuum cleaner.
Storing the Vacuum Cleaner
When not in use, wrap the cord around the cord hanger as shown. The
hose can be wrapped around the handle/wand if the wand is being
stored un-extended. Store the dusting brush/crevice tool in its proper
place on the left of the vacuum cleaner.
Dust Tank Components
The dust tank consists of several key components. Always make sure that
all parts are properly reinstalled after emptying the dust tank.
NEVER operate the vacuum cleaner without all lters in place.
NEVER operate the vacuum cleaner with wet lters or components.
Key components:
1. Filter frame and foam lter:
Captures medium to ne particles. It consists of Filter frame &
Foam lter. These are washable.
2. Foam lter
3. Dust tank lid: Open to access the foam lter.
4. Dust separator: Separates dust from air coming in.
5. Side door: Open to remove dirt from the dust separator.
6. Prevention tab: Prevents the lid from closing without a foam lter
installed.
7. Dust tank: Where dirt is collected.
8. Bottom plate: Open to empty the dust tank.
y Electrical shock and personal injury hazard.
y Take care when wrapping the cord. Wrapping the cord too tightly
puts stress on the cord and can cause cord damage. Do not
crisscross when wrapping the cord. A damaged cord could cause
an electrical shock hazard, personal injury or damage.
WARNING
1. Filter frame
2. Foam lter
3. Dust tank
lid
4. Dust separator
5. Side door
6. Prevention
Tab
7. Dust tank
8. Bottom plate
Loading ...
Loading ...
Loading ...