Loading ...
Loading ...
Loading ...
01 SETTING UP
Setting up your french door refrigerator _13
First thing! Make sure that you can easily move your Refrigerator to its final location by measuring doorways
(both width and height), thresholds, ceilings, stairways, etc.
The following chart details the exact height and depth of Samsung French Door Refrigerator.
NOTE
The measurements here are based on the design dimension,which may differ depending on the measuring method.
CAUTION
When moving your refrigerator
To prevent floor damage, be sure the front adjusting legs are in the
up position(above the floor).
Refer to ‘Adjusting the doors’ (on page 20).
Model RF18** RF20**
Dimension
(inch/mm)
Width (A) 32 1/8(817)
Depth
without door (B) 24 1/4(617) 26 1/4(667)
with door (C) 30 1/2(775) 32 1/2(825)
Height
without hinge (D) 68 3/4(1745) 68 3/4(1745)
with hinge (E) 70 1/8(1780) 70 1/8(1780)
total 70 1/8(1780) 70 1/8(1780)
Congratulations on your purchase of this Samsung French Door Refrigerator. We hope you enjoy the state-of-art
features and efficiencies that this new appliance offers.
Selecting the best location for the Refrigerator
• A location with easy access to the water supply.
• A location without direct exposure to sunlight.
• A location with level (or nearly level) flooring.
• A location with enough space for the Refrigerator doors to open easily.
• Allow sufficient space to the right, left, back and top for air circulation.
• Please ensure that appliance can be moved freely in the event of maintenance & service.
• If you install the Refrigerator where is below 50ºF (10ºC), it may not function optimally.
• Do not locate the refrigerator where the wet condition.
B
C
D
A
E
GETTING READY TO INSTALL THE REFRIGERATOR
Flat-blade
screwdriver(-)
Control Lever
1492mm
RF18* : 1172mm
RF20* : 1222mm
90°
90°
817mm
35mm
100mm
RF18*: 617mm
RF20 *: 667mm
337.5mm
135°
135°
（100mm）
RF18* : 1172mm
RF20* : 1222mm
Setting up your french door refrigerator
NW2-FDR_DA68-01845C-26_EN.indd 13 2019-01-22 4:41:46
Loading ...
Loading ...
Loading ...