Loading ...
Loading ...
Loading ...
8
Installation
A standard electrical supply (115 VAC only, 60 Hz, 10A), properly grounded in accordance with National
Electrical Code and local codes and ordinances is required.
IMPORTANT: Do not kink or pinch the power supply cord between the tool box refrigerator and wall or com-
partment.
MOVEMENT OF YOUR APPLIANCE
Position the tool box refrigerator in a dry and well-ventilated place. Keep the tool box refrigerator away from
direct sunlight, heaters, and corrosive gases or chemicals.
Clean the interior surface with lukewarm water using a soft cloth.
Place your appliance on a hard and level floor that is strong enough to support it when it is fully loaded.
The tool box refrigerator can be simply moved from one room to another by using the pre-installed wheel roll-
ers.
If the appliance is needed to be lifted, two or more people should move tool box refrigerator. Failure to do so
can result in back or other injury.
We do not recommend installing the appliance on carpet.
Loading ...
Loading ...
Loading ...