Loading ...
Loading ...
Loading ...
13
Troubleshooting
Problem Possible Causes Solutions
The machine won't
operate
The tool box refrigerator is un-
plugged
The voltage is not in the correct
range
Too many appliances running form
the same power circuit
Push the plug completely into the power source
Make sure that the tool box refrigerator runs on a
dedicated power source that can support the
maximum power consumption of the tool box re-
frigerator
Run the tool box refrigerator on a dedicated pow-
er source
Noise during operation
Unit is not on a leveled surface
Certain sounds are normal
Make sure unit is placed in a leveled surface
See “Normal Sounds”
The compressor runs
for 1 to 5 minutes and
stops
The voltage is not in the correct
range
Unplug and restart when the power is normal
The compressor runs
but the inner liner
does not get very cold
The ambient temperature is too
high
The system is blocked
If temperature is higher than 90°F, the unit need
longer to cool to the set temperature
Contact Whynter Service Department via email at
service@whynter.com
The tool box refrigera-
tor does not cool suffi-
ciently
Tool box refrigerator door being
opened frequently
Tool box refrigerator door left open
for a while
Not enough adequate clearance
Tool box refrigerator is overfilled
Ambient temperature is too high
Refrain from opening the tool box refrigerator
door recurrently
Make sure to close tool box refrigerator door
Follow recommended clearance measurements
If temperature is higher than 90°F, the unit need
longer to cool to the set temperature
The compressor does
not run
The controller is faulty (the power
indicator is not on)
The thermostat is set too high and
the ambient temperature is too low
Contact Whynter Service Department via email at
service@whynter.com
Set the tool box refrigerator to a lower tempera-
ture
Interior light does not
work
No power at outlet
tool box refrigerator is unplugged
Light bulb burned out
Replace fuse or reset the breaker
Push the plug completely into the outlet
Replace light bulb
Door does not fully
close
Unit is not on a leveled surface
Stored items holding door open
Make sure unit is placed in a leveled surface
Move stored item to a different location
Foods defrosting
The tool box refrigerator is un-
plugged
Fuse blown
Tool box refrigerator door being
opened frequently
Tool box refrigerator door left open
for a while
Push the plug completely into the power source
Replace fuse or reset the breaker
Check to see if an object is holding the door open
Excessive frost
buildup
Door left open too frequent or too
long door openings
High humidity
Check to see if an object is holding the door open
Open the door less often
Many common tool box refrigerator problems are easily resolved. Try the troubleshooting suggestions be-
low to see if the problems can be resolved before having to contact the service department.
Loading ...
Loading ...