Loading ...
Loading ...
Loading ...
6
OPTIONS
Touch to activate additional wash options or additional
features on the washer before touching Start. Additional
wash options or additional features selected after touching
Start may not activate.
Once a wash option or additional feature is selected, it is
saved for the cycle selected. To return to factory default
cycle settings, unplug washer for 30 seconds; then
plug back in.
Cycle Signal
Use this option to set the volume level or turn off the
signal that sounds at end of cycle.
With each touch of the Cycle Signal a number is
displayed for the sound level selected: 0 = off, 1 = low,
2 = medium, 3 = high.
NOTE: Touch-tone volume does not change.
To turn off the tones that sound when a setting is
touched: Touch and hold CYCLE SIGNAL for about
3 seconds. Repeat to turn them on.
5
B
A
Control Lock
Touch and hold for 3 seconds to lock the controls
to avoid unwanted changes or operation. Touch
and hold 3 seconds again to unlock. For each second
CONTROL LOCK is held down, the display will count
down one second: you will see “3,” then “2,” then “1.”
You may still touch START to pause the cycle, or touch
POWER to turn off the washer.
ADDITIONAL OPTION
Drum Light (on some models)
Touch and hold EXTRA RINSE for 3 seconds to turn on
the Drum Light.
Soil
Soil level (wash time) is preset for each wash cycle.
When
you change the soil setting,
the cycle time will increase or
decrease in the Estimated Time Remaining display.
For most loads, use the soil level that is preset with
the cycle you have chosen. For heavily soiled and
sturdy fabrics,
use the Soil setting
to select more wash time.
For lightly soiled and delicate fabrics,
use the
Soil setting
to select less wash time. Lower soil level
settings will help reduce tangling and wrinkling.
Extra Rinse
Activate this option to add an extra rinse to most cycles.
NOTE: Extra Rinse can also be used to turn on the Drum
Light (on some models). Simply touch and hold EXTRA
RINSE for 3 seconds.
Loading ...
Loading ...
Loading ...